LED MODULE

Full Spectrum

ProART98 LED modules are designed to reproduce colours with high fidelity, with reported values of Ra approximately 98, R9 approximately 98, Rf approximately 93 and Rg approximately 99. The technology focuses on accurate colour representation under artificial illumination.

Warm Dim

Warm Dim progressively changes colour temperature as the light is dimmed, reproducing the transition towards warmer tones associated with sunset. It combines dimming and colour-temperature variation in a single lighting experience.

tuneWHITE

ELR’s tuneWHITE technology enables controlled changes in white-light colour temperature, allowing illumination to move between warmer and cooler tones. The system supports different lighting atmospheres through adaptable white light.

Low Blue Light with tuneWHITE

Combined with tuneWHITE modules operating from 1800K to 4000K, this approach allows lower colour temperatures to be selected during evening and night-time use. ELR presents it as a way to reduce blue-light exposure through dynamic colour-temperature control.

flexiK

flexiK LED modules allow the selection of a desired colour temperature from 1800K to 5500K, in increments of 100K. This provides a configurable approach to white-light specification within the supported module range.

flexiK Setup provides a configuration method for selecting colour temperature on compatible 50N flexiK LED modules. It complements the adjustable-temperature capability of the flexiK system.

AuraMX

Part of ELR’s ColourMX family, AuraMX combines red, green and blue colour mixing with a Superior White channel. The documented white range extends from 1800K to 12000K, bringing functional white illumination and expressive colour capability together within one module platform.

Endless Natural Tones
Sort tones drawn from nature,
beyond white light
1800K – 12000K
From ember glow to open sky
CRI > 90 R9 > 80
CRI~80 R9 = 0
CRI~95 R9 90

ColourMX

RGBW combines red, green and blue channels with a white-light channel, while RGBA uses an amber channel. These configurations extend the possibilities of colour mixing and allow different approaches to creating architectural lighting atmospheres.

X-BEAM

X-BEAM is engineered to provide accurate light distribution and chromatic consistency while maximising the light output ratio of the luminaire. It focuses on the relationship between beam precision and efficient delivery of light.

ATePS

The Advanced Thermal Protection System combines LED-engine design, electronics and thermal-management firmware. Under abnormally high ambient temperatures, it automatically regulates operating conditions to maintain the highest possible light output compatible with protecting the LED engine.

Light Weight Heatsink

ELR’s heatsink structure uses a geometry designed to promote natural convection without active cooling fans. The existing documentation describes a patented design requiring approximately 50% less material, reducing weight while supporting thermal management.